How to Use the New Pazzles Pen Tool		Products and Promotional
The new Pazzles Inspiration Pen Tool will accept pens in a variety of thicknesses from a ball point pen to a Sharpie® marker. Learn how to use the Pazzles Pen Tool for different thicknesses and types of pens. You will also be shown the correct way to install the tool and set the height of the pen.
Video Runtime: 7:26		iPod/iPhone | Low-Res

Pen Tool Instructions

1. 1. Loosen the Pen Tool by turning the barrel, wider pens may require loosening the barrel more.
2. 2. Insert a pen in to the Pen Tool and tighten it in place by turning the barrel. Do not over-tighten.
3. 3. Open or create an image in Inspiration Studio™.
4. 4. Apply paper onto the cutting mat and insert the mat into the Inspiration Creative Cutter™.
5. 5. In Inspiration Studio, select ‘Cut Project’ to open the Cut Control Panel.
6. 6. Under the ‘Select your media type’ drop-down menu, select ‘Draw.’
7. 7. Press ‘Start’ in the Cut Control Panel to draw your design.
8. 8. If the pen drags, try lowering your pressure or insert your pen so that it sits higher in the Pen Tool. Generally the tip should stick out about 1/8″.
9. 9. Assign different colors to your pen lines to use multiple pen colors.
10. 10. See your Inspiration Creative Cutter manual for more details about changing pen line colors.

Other Tips and Tricks

1. 1. Create your image in Inspiration Studio.
2. 2. In Inspiration Studio change the pen lines that you wish to draw to a different color than the pen lines you wish to cut.
3. 3. Follow instructions 4–6 under ‘Draw’
4. 4. In the Cut Control Panel, select the color box that matches the color of the image you wish to draw.
5. 5. Select ‘Cut Project.’ When your project is finished, do not remove the cutting mat and paper.
6. 6. Once drawing is complete, replace the Pen Tool with the Blade Holder.
7. 7. Select the color box that matches the outline of your image.
8. 8. Select ‘Cut Project’ to begin cutting.

1. 1. Create your image in Inspiration Studio.
2. 2. Using the ‘Select Elements’ tool, select the image you want to fill in.
3. 3. Under the ‘Shape’ drop-down menu, select ‘Inside’ under ‘Engraving.’
4. 4. In the window that appears put a value of 0.10 or less under ‘Tool’ (use 0.02 for a solid fill).
5. 5. Select ‘S-Sweep’ from the Style drop down menu under ‘Fill’
6. 6. Select ‘Ok’ to fill in your design.